Dundee City Council

Eurocell Solid Roof System - Replacements and New Build

Wall System 1 EWI is an external wall insulation system mechanically fixed to masonry / concrete walls (including no fines concrete).  The system consists of either Mineral Fibre insulation with a reinforced basecoat and Spar Dash Aggregate or silicon render finish. SPS Envirowall Wall System 1 Mineral Wool has been considered for registration for both low-rise buildings (where no storey in a domestic building exceeds 18m above the ground or where the height of a non-domestic building does not exceed 18m) and high-rise domestic buildings with storey heights above 18m and non-

Wall System 1 EWI is an external wall insulation system mechanically fixed to masonry / concrete walls (including no fines concrete).  The system consists of either Phenolic insulation with a reinforced basecoat and Spar Dash Aggregate or silicon render finish. SPS Envirowall Wall System 1 Mineral Wool has been considered for registration for low-rise buildings (where no storey in a domestic building exceeds 18m above the ground or where the height of a non-domestic building does not exceed 18m).​

Wall System 1 EWI System is an external wall insulation system mechanically fixed to masonry / concrete walls (including no fines concrete).  The system consists of either white or enhanced (grey) EPS insulation with a reinforced basecoat and Acrylic Brick slip, Spar Dash Aggregate, Acrylic, Silicon or Brick Effect render finish. SPS Envirowall Wall System 1 has been considered for registration for low rise only buildings (where no storey in a domestic building exceeds 18m above the ground or where the height of a non-domestic building does not exceed 18m).

Wall System 2 (Mineral) EWI is an external wall insulation system mechanically fixed to masonry / concrete walls (including no fines concrete).  The system consists of either white or enhanced (grey) EPS insulation with a reinforced basecoat and Mineral render finish. SPS Envirowall Wall System 2 (Mineral) has been considered for registration for low rise only buildings (where no storey in a domestic building exceeds 18m above the ground or where the height of a non-domestic building does not exceed 18m).

STAS Submission for House Type Huntly2 1308dt only

The changes included within this variation is to uplift the specification for the Dalachy and Tiree types currently complying with the 2013 Standards to comply with the 2015 Standards.